UV EPROM Eraser Professional Stable Ultraviolet Light Timer EPROM Data Erase Tool Semiconductor Wafer (IC) EPROM Erase Radiation

463924
SKU: 463924 Category:
Description

Notice

High Quality UV EPROM Eraser Ultraviolet Light Timer Semiconductor Wafer (IC) EPROM Chip data Erase Radiation

Attention new buyers
As long as the purple light in the drawer can be controlled by your timing and switch
There is no problem with this device
(You can see purple light in the small hole of the drawer after turning on the power switch and timer switch.) If the erasure cannot be performed or the erasure is not clean, please find other reasons, such as removing the light-shielding paper and cleaning the glass window on the chip to rule out whether the programmer is Normal, confirm whether the IC has been aged and damaged.

Product introduction

Used to erase EPROM memory chips,
All data in EPROM can be completely erased in 10 minutes.
Before use, first remove the light-shielding sticker on the window of the EPROM memory chip.
The eraser can erase up to 6 chips at the same time.
Set the timer to 10 minutes,
Just turn on the power. If the erasure is not clean, you can extend the erasing time. Please use the programmer to check the chip before programming.
Note that the chip glass window is placed upwards. Some manufacturers’ chips take longer to erase. For details, please refer to the chip manufacturer’s instructions.
As the chip ages, erasure may take a long time or cannot be erased. Drawer structure, drawer size (length, width and height): 95X55X13 mm (mm), built-in UV lamp.
Light source wavelength is less than 400nM
(It can be used for the development of some photosensitive materials or light curing of small prints) The specific efficacy is subject to actual use, and we cannot promise or guarantee it.
Working voltage: AC100V-240V, universally used all over the world.
The internal circuit and mechanical structure are relatively simple,
The manufacturer does not provide instructions for use, only simple bubble packaging bags
The seller will ship after testing and there is no warranty. This type of product is not a mass-produced electrical appliance and the workmanship and some details are not very good. In addition, the anti-violet plastic has an odor. Buyers who have requirements for workmanship and various details, please contact us. Relevant psychological preparation

Features:

Power requirement : AC 220V±20%
Working Frequency : 43Hz-57Hz
Working Temperature: -10°C – 40°C
Working Humidity: 20%~90% relative

UV EPROM Eraser Professional Stable Ultraviolet Light Timer EPROM Data Erase Tool Semiconductor Wafer (IC) EPROM Erase RadiationUV EPROM Eraser Professional Stable Ultraviolet Light Timer EPROM Data Erase Tool Semiconductor Wafer (IC) EPROM Erase RadiationUV EPROM Eraser Professional Stable Ultraviolet Light Timer EPROM Data Erase Tool Semiconductor Wafer (IC) EPROM Erase RadiationUV EPROM Eraser Professional Stable Ultraviolet Light Timer EPROM Data Erase Tool Semiconductor Wafer (IC) EPROM Erase RadiationUV EPROM Eraser Professional Stable Ultraviolet Light Timer EPROM Data Erase Tool Semiconductor Wafer (IC) EPROM Erase RadiationUV EPROM Eraser Professional Stable Ultraviolet Light Timer EPROM Data Erase Tool Semiconductor Wafer (IC) EPROM Erase RadiationUV EPROM Eraser Professional Stable Ultraviolet Light Timer EPROM Data Erase Tool Semiconductor Wafer (IC) EPROM Erase RadiationUV EPROM Eraser Professional Stable Ultraviolet Light Timer EPROM Data Erase Tool Semiconductor Wafer (IC) EPROM Erase RadiationUV EPROM Eraser Professional Stable Ultraviolet Light Timer EPROM Data Erase Tool Semiconductor Wafer (IC) EPROM Erase Radiation
Shipping & Delivery

Shipping & delivery

When will I receive my item?
All orders are processed within 1-3 business days. Orders are not shipped or delivered on weekends or holidays.
Estimated order delivery times are 4 to 14 days from the date of purchase.
Out of stock / back order = take another 1-2 weeks.

How can I track my item?
Parcel tracking code will be given.

What can I do if the merchant have not shipped my items after 3 days?
If the merchant did not update the delivery status or input any the tracking number for your order after 3 days, you may contact us for further action.

What can I do if I have not received your order after 14 days?
If you have not received an order after 14 days, you should track your product using the tracking number and contact the forwarder (logistic company)

Buyers notice:
*Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
*Due to the difference between different monitors, the picture may not reflect the actual color of the item.
*Our company can buy other Electronic accessory and IC parts for you. You should tell us clearly about the product's grade, suffix,encapsulation, Brands and so on.
*Our company is an entity administration. We have lots of grades that we can't upload all of them.Lot quality buying will be much cheaper.
*Avoid the damage or loss in transmission. Please seriously check the parts when you receive them.  Do not sign in if there's something wrong. And contact me at once. Let's solve the problem together.

Disclaimer - Information Sharing

Our website/platform (hereinafter referred to as "the site") is intended to provide various types of information, including but not limited to news, articles, opinions, comments, data, and other resources, for the reference and understanding of our users. While using the site, please be aware of the following disclaimer:

  1. Accuracy of Information: We make every effort to ensure that the information provided is accurate, comprehensive, and up-to-date. However, we cannot guarantee the 100% accuracy of the information. Therefore, we are not responsible for any losses or damages incurred due to reliance on the information on this site.
  2. Purpose of Information: The information provided on this site is for general reference and information sharing purposes and does not constitute professional advice. Any decisions or actions should be based on independent professional consultation and judgment. Exercise caution before taking any action.
  3. Third-Party Links: The site may contain links to third-party websites or resources. These links are provided for convenience, and we are not responsible for the content or accuracy of these links. Accessing these links is at your own risk.
  4. Intellectual Property: All content on this site, including but not limited to articles, images, videos, and other resources, is protected by intellectual property laws. Unauthorized copying, reproduction, or use of this content in any way is prohibited.
  5. Changes and Updates: Information on this site and the disclaimer may change or be updated at any time without prior notice. You should check regularly for the latest information.
  6. User Responsibility: Your use of all information and resources on this site is at your own discretion and risk. We are not responsible for any losses or damages you may incur when using the information on this site.

By using this site, you agree to and accept these disclaimers. If you do not agree with these terms, please discontinue using the site. If you have any questions about using the site or need further clarification, please feel free to contact us. We welcome and encourage users to share information but also strongly advise exercising caution and self-judgment in any decision-making.

More Products

Smart Car Battery Charger 12V 24V

SKU: 679967
10A 12V 24V 5A Digital Display Detection Car Charger Automotive Battery Charger Car Battery Charger. Recharge your 12V or 24V car battery with this powerful and intelligent charger. Featuring a digital display and automatic detection, it delivers optimal charging current for fast and efficient charging.
Add To Cart This product has multiple variants. The options may be chosen on the product page

Original Japan GOOT PX-201 TQ-95 HAKKO 980 981 Fast Thermal Electric Soldering Iron Input Voltage 220~240V

SKU: 459321
 
Add To Cart This product has multiple variants. The options may be chosen on the product page

Transparent Glass Tube Fuse Holders

SKU: 644373
5*20mm 6*30mm glass fuse holder with transparent cover fuse blocks 5x20mm 6x30mm insurance header 250V. Protect your circuits with our transparent glass tube fuse holders. These holders provide clear visibility of the fuse status, making it easy to identify blown fuses. Available in 5x20mm and 6x30mm sizes, they're ideal for a variety of applications, including automotive, industrial, and electronic circuits.
Add To Cart This product has multiple variants. The options may be chosen on the product page

BTB04-600SL TO-220 4A/600V Triode BTB04

SKU: 358167

534-1-1 Potentiometer switch 1K 2K 5K 10K 20K 50K 100K 100R 200R 500R

SKU: 314252
Add To Cart This product has multiple variants. The options may be chosen on the product page

2.54mm Pitch 2-16Pin KF128 PCB Screw Terminal Block Wire Connector for 26-18AWG Cable

SKU: 679543
Model Number: KF128-2.54 2-16PIN Origin: Mainland China Certification: none Color: Green Type: PCB Terminal Blocks Rated Voltage: 150V Rated Current: 6A Pitch: 2.54mm / 0.1″ Pins 1: 2Pin 3Pin
Add To Cart This product has multiple variants. The options may be chosen on the product page